MATHIASEN
MACHINERY, INC.
REF. #: 23-157Combined Drawing Machine (Draw, Straighten and Cut)
Manufacturer: SCHUMAG
Model: IIID
Age: 1999
Rounds - finished size range: 0.250 inch - 1.126 inch (6.35 mm to 28.6 mm)
Hexagons - finished size range: 0.394 inch - 1.062 inch (0.732 rd to hex)
Squares - finished size range: 0.394 inch - 0.984 inch
Material Tensile max: 150,000 psi
Material run on the machine was: Low to medium carbon steel
Speed: 394 fpm
Die Pull: 26,666 pounds
Bar Length: 10 feet to 20 feet
Pay-off reel coil size range coil ID: 33 to 42 inches
Pay-off reel coil size range coil OD: 42 to 58 inches
Coil height: 80 inches
Coil weight: 6,500 lbs
Chamfer and Face - max bars/min (bpm): 40 bpm
Power - Main: 480 vac, 3 phase, 60 hz
Power - some miscellaneous: 120 vac, 1 phase, 60
Power - Control: 24 vdc
PLC: Allen Bradley PLC 5 with Visitec software
Compressed Air required: 90 psi (6 bar)
Drawing Unit motor: 482 hp - Reliance
2-Roll Straightener motors: 74 hp each roll - Reliance
(must be confirmed)
2-Roll Straightener Rolls: two complete sets with bearing housings
Testers: Foerster
Coils, saturation coils and demags: Schumag
Hydraulics: Rexroth
Cylinders: Hydro-Line & Festo
Pay-off Reel style: Double reel, standard carousel
Steel Shot Descalers: (2) Wheelabrators with
(3) 75 hp wheels each
Complete Line. In storage
