Specifications

MATHIASEN MACHINERY, INC.

Ref. #: 34-239
Mfg. Jager
Model: NS 200
1988 updated 1997
Operating Manual Specifications.
Welding Width maximum: 2600 mm (102.3 inch) one strip.
Welding Width Minimum: 1050 mm (40 inch)
Wire Diameter: 0.5 to 2.5 mm (.019 to .099 inch)
                            0.5 to 1.5 mm (.019 to .059 inch) with feeding double wires
The line and cross wires are of smooth stainless, bright or galvanized steel wire with a tensile strength of 500 to 600 N/mm2
Cross wire pitch: Possible from 6 to 200 mm (1/4 to 8 inch). Steplessly programmable
Double Wire Feeding: 6, 8, 10, 12.5, 15, 20, and 25 mm (1/4, 1/3, 3/8, ½, 5/8, ¾, and 1 inch)
Line wire pitch:  Possible 6, 8, 10, 12.5, 15 to 200 mm in steps of 5 mm (1/4, 1/3, 3/8, ½, 5/8 to 8 inch in steps of ¼ inch)
Welding Capacity with Feeding of One Wire:
Cross Wire dia.: 0.5 to 0.9 mm and Cross wire pitch 40 = 100 strokes/min.
Cross Wire dia.: 1 to 1.8 mm and Cross wire pitch 40 = 80 strokes/min.
Cross Wire dia.: 1.8 to 2.5 mm and Cross wire pitch 40 = 70 strokes/min.
Cross Wire dia.: 0.5 to 0.9 mm and Cross wire pitch 200 = 65 strokes/min.
Cross Wire dia.: 1 to 1.8 mm and Cross wire pitch 200 = 60 strokes/min.
Cross Wire dia.: 1.8 to 2.5 mm and Cross wire pitch 200 = 60 strokes/min.
Welding Capacity with Feeding of Double Wire:
Cross Wire dia.: 0.5 to 0.9 mm and Cross wire pitch 2 X 25 mm = 150 wires/min.
Cross Wire dia.: 0.9 to 1.5 mm and Cross wire pitch 2 X 25 mm = 140 wires/min.
Installation Output: 7 X 60 KVA = 420 KVA with 50% DC. Required mains transformer capacity: ab. 650 KVA
Electrical Supply: 480 V, 60 Hz, 3 Phase
Complete with pay offs, tensioner, slitter and coiler.
Machine is still installed and operational.