MATHIASEN
MACHINERY, INC.
REF.
# 60A-292Rod Drawing Machine
Mfg.: KOCH
Model: KGT 1000/8
Year of mfg. 1995
Drawing range: Enter 5.5 – 3.6 mm dia. (low carbon)
Ent. 4.00 mm to 3.00 mm (SAE 1080)
Output: 1.4 – 2.1 mm
Drawing capstans: hardened 550 mm diameter
Motors: 73 kW AC each block
Drive SIEMENS
Max. Drawing speed: 25 m/s;
Water cooled Dies and Capstans. Required water flow rate: 75 l/h per 1 kW effective drive rating at Δt = 10°C; water pressure: 2 bar min.
Die holder: 43 mm dia. x 28;
SIEMENS AC-Antrieben 400V-50Hz,
PLC SIEMENS S5-115 with SIEMENS frequency control units SIMOVERT VC
Material: Steel wire; Inlet strength: 1600 N/mm2
Wire drawing machine with motor and controls only. (no pay-off or take-up)
